English
Choose language
Choose currency
Centrul de apeluri funcționează între orele 09.00-18.00
Alegeți moneda
HYDSEALSTORE.RO © 2025-2026

Guide ring WR CFP

Guide ring 20x24x9.5 WR CFP
Quantity in stock
92
3.42 RON
Guide ring 20x25x5.4 WR CFP
Quantity in stock
96
2.64 RON
Guide ring 20x25x9.5 WR CFP
Quantity in stock
100
3.42 RON
Guide ring 21x25x9.5 WR CFP
Quantity in stock
94
10.81 RON
Guide ring 22x26x9.5 WR CFP
Quantity in stock
91
3.42 RON
Guide ring 25x28x4 WR CFP
Quantity in stock
100
3.42 RON
Guide ring 25x29x6.1 WR CFP
Quantity in stock
100
3.42 RON
Guide ring 25x29x9.5 WR CFP
Quantity in stock
197
3.16 RON
Guide ring 25x30x5.6 WR CFP
Quantity in stock
100
3.42 RON
Guide ring 25x30x9.5 WR CFP
Quantity in stock
100
3.16 RON
Guide ring 25x31x9.5 WR CFP
Quantity in stock
100
3.42 RON
Guide ring 25.4x28.58x9.78 WR CFP
Quantity in stock
25
4.24 RON
Guide ring 27x32x9.5 WR CFP
Quantity in stock
100
5.28 RON
Guide ring 28x31x5.6 WR CFP
Quantity in stock
94
5.80 RON
Guide ring 28x32x5.6 WR CFP
Quantity in stock
100
5.80 RON

WR CFP guide rings are guide components with a WR profile made of CFP composite material (carbon fiber PTFE), used in hydraulic cylinders with high lateral loads or with higher requirements compared to WR POM rings. CFP combines the load-bearing capacity of carbon fibers with the low coefficient of friction of PTFE, providing superior performance in applications with intense mechanical loads.

CFP composite material and uniform distribution of lateral loads over the guide surface

CFP is a PTFE matrix reinforced with carbon fibers. The fibers increase resistance to compression and mechanical wear compared to pure PTFE or POM, allowing use under higher lateral loads without deformation of the ring. PTFE maintains a low coefficient of friction and self-lubrication of the surface. You can find the complete catalog of guide rings on hydsealstore.ro.

Practical differences between WR CFP and WR POM depending on load and application conditions

WR POM is the choice for moderate radial loads — an economical and reliable solution for most industrial cylinders. WR CFP is selected when lateral loads exceed the capacity of POM, when the operating temperature is higher, or when friction must be reduced to a minimum. CFP also has superior chemical resistance compared to POM with special fluids. Also compare with WR POM guide ring for standard applications.

Choosing the size according to the assembly diameter, radial thickness, and groove width

WR CFP rings are selected according to the inner diameter, the outer diameter of the housing, and the groove width. Installation tolerances are similar to pure PTFE — more permissive compared to POM. They are replaced during a complete overhaul when the radial clearance exceeds the tolerances. Also compare with WRT guide strip made of the same CFP material for continuous solutions.

Selecting WR CFP rings available for order at Hydraulic Seals Store

We keep WR CFP guide rings in stock in standard sizes. We deliver quickly throughout Romania. Contact the Hydraulic Seals Store team for assistance in choosing between WR POM and WR CFP for your application.

This site uses cookies.
Our site uses cookies to improve your experience, personalize content, provide social networking features and analyze traffic.