English
Choose language
Choose currency
Centrul de apeluri funcționează între orele 09.00-18.00
Alegeți moneda
HYDSEALSTORE.RO © 2025-2026

Guide strip WRT

Guide strip 2.5x5.6 WRT
Quantity in stock
17
24.25 RON
Guide strip 2.5x8.1 WRT
Quantity in stock
20
24.88 RON
Guide strip 2x9.7 WRT
Quantity in stock
20
24.25 RON
Guide strip 2.5x9.7 WRT
Quantity in stock
17
25.97 RON
Guide strip 3x9.7 WRT
Quantity in stock
20
32.90 RON
Guide strip 3.5x9.7 WRT
Quantity in stock
20
49.59 RON
Guide strip 4x9.7 WRT
Quantity in stock
20
54.92 RON
Guide strip 2.5x12.7 WRT
Quantity in stock
20
32.60 RON
Guide strip 3x12.7 WRT
Quantity in stock
20
40.83 RON
Guide strip 2x15 WRT
Quantity in stock
16
32.60 RON
Guide strip 2.5x15 WRT
Quantity in stock
12
32.60 RON
Guide strip 3x15 WRT
Quantity in stock
20
40.83 RON
Guide strip 3.5x15 WRT
Quantity in stock
20
68.66 RON
Guide strip 4x15 WRT
Quantity in stock
20
65.80 RON
Guide strip 2x20 WRT
Quantity in stock
20
34.62 RON

WRT guide strips are guide components made of CFP composite material (carbon fiber PTFE), used in hydraulic cylinders to absorb high lateral loads and precisely guide the piston or rod. CFP combines the mechanical strength of carbon fibers with the sliding properties of PTFE, achieving a higher load-bearing capacity compared to pure PTFE, without significantly increasing the coefficient of friction.

CFP composite material and its ability to absorb loads and limit metal–metal contact

CFP is a PTFE matrix reinforced with carbon fibers. The fibers significantly increase resistance to compression and mechanical wear compared to pure PTFE, allowing use in applications with higher lateral loads or higher sliding speeds. The coefficient of friction remains low, similar to pure PTFE. You can find the complete catalog of guide strips on Hydraulic Seals Store.

Using the WRT strip to guide the piston or rod, depending on the groove position

WRT strips are installed in the guide grooves of the piston or cylinder head, depending on the distribution of lateral loads in the application. In cylinders with high lateral loads at the outer end of the stroke, the strip is installed on the cylinder head; with evenly distributed loads, on the piston. Also compare with BST guide strip made of pure PTFE for moderate loads.

Selecting the thickness and width from the catalog and correctly sizing the installed segment

WRT strip is available in standardized thicknesses and widths. The thickness is selected according to the available clearance in the groove; the width determines the contact surface and load-bearing capacity. The length of the installed segment is calculated from the circumference of the groove, minus a small thermal expansion clearance. Also compare with guide rings prefabricated for some applications.

Purchasing WRT guide strip from Hydraulic Seals Store

We keep WRT guide strips in stock in standard sizes. We deliver quickly throughout Romania. Order online or contact the Hydraulic Seals Store team for assistance with sizing and selection.

This site uses cookies.
Our site uses cookies to improve your experience, personalize content, provide social networking features and analyze traffic.